Oil and heat-resistant. Static dissipating.

UniMatch banded V-belts are available in classical multiple sections B, C and D and in deep wedge sections 3V, 5V and 8V. They feature the same premium constructions as the individual belt and are bonded together with a fabric-neoprene top band. These belts are often used on vertical shafts and where belt vibration and flopping must be minimized.

Stock banded V-belts are listed below. To obtain the total list price, multiply the list price per rib by the total number of ribs per band. In-between lengths of the B, C and D sections are available, as are lengths to 600 inches in the B and C sections on special order. Consult Jason Customer Service. These belts conform to RMA Engineering Standard IP-20 and IP-22.

Banded multiple V-belts are specified by the letter "R" denoting banded construction, the belt section and the belt Standard Length Designation in inches. The number of belts in a band is given separately; i.e., RC90 1X8 - 1 Belt & 8 Ribs.

Banded deep wedge V-belts are specified by the letter "R" denoting banded construction, the belt section and a number giving the outside length in inches multiplied by 10, followed by a dash and the number of bands required. R5V750 1X8 - 1 Belt & 8 Ribs.
26 - 50 of 82 | Results Per Page | View | Unit of Measure
1 2 3 4 

Item #

Approx. Weight Per Rib

N/A 1.00 lb
N/A 1.02 lb
N/A 1.04 lb
N/A 1.06 lb
N/A 1.08 lb
N/A 1.10 lb
N/A 1.12 lb
N/A 1.15 lb
N/A 1.16 lb
N/A 1.18 lb
N/A 1.21 lb
N/A 1.22 lb
N/A 1.26 lb
N/A 1.29 lb
N/A 1.30 lb
N/A 1.32 lb
N/A 1.35 lb
N/A 1.36 lb
N/A 1.34 lb
N/A 1.39 lb
N/A 1.43 lb
N/A 1.47 lb
N/A 1.50 lb
N/A 1.54 lb
N/A 1.58 lb
26 - 50 of 82 | Results Per Page | View | Unit of Measure
1 2 3 4