Oil and heat-resistant. Static dissipating.

Built to European standards DIN 7753, AFNOR T47-117, BS 3790 and ISO 4184. SP series V-belts were the forerunners of the RMA deep wedge, high capacity V-belt sections. These deep-wedge belts (38°) allow for more power, high speed ratios, smaller center distances and more compact drives. They are replacement belts for many imported machines and for machinery built for export.

These V-belts also have the UniMatch feature. This eliminates belt set matching with its multiple stocking problems.
Non-standard lengths are available on special order.
Metric V-belts are specified by letters showing the SP section and numbers giving the pitch length in millimeters.
For example: SPA 850.

NOTE : Belt sizes to 2240 mm in length are also available in raw edge construction. These belts are designated by an X prefix rather than S. For example: XPB1400. For Raw Edge Construction, add 25% to list price.

Although metric V-belts are ordered by section and pitch length, they are sometimes labeled with the section letters, belt length in millimeters and the letters LA (approx. length), LI (inside length) or LW (pitch length).

Add 30 mm to pitch length for outside length. Additional sizes available to SPC13700.

For notched construction add 25% to the list price.
26 - 35 of 35 | Results Per Page | View | Unit of Measure
1 2 

Item #

Top Width

Thickness

Inside Lengths

Approx. Weight

N/A 22 mm N/A 18 mm N/A 7100 mm N/A 5.6 lb
N/A 22 mm N/A 18 mm N/A 7500 mm N/A 5.9 lb
N/A 22 mm N/A 18 mm N/A 8000 mm N/A 6.3 lb
N/A 22 mm N/A 18 mm N/A 8500 mm N/A 6.7 lb
N/A 22 mm N/A 18 mm N/A 9000 mm N/A 7.1 lb
N/A 22 mm N/A 18 mm N/A 10000 mm N/A 7.9 lb
N/A 22 mm N/A 18 mm N/A 10600 mm N/A 8.3 lb
N/A 22 mm N/A 18 mm N/A 11200 mm N/A 8.8 lb
N/A 22 mm N/A 18 mm N/A 11800 mm N/A 9.3 lb
N/A 22 mm N/A 18 mm N/A 12500 mm N/A 9.9 lb
26 - 35 of 35 | Results Per Page | View | Unit of Measure
1 2