Pump Plate Strainers are made to thread into Part "A" or Part "D" cam and groove fittings. Threads are NPT. The strainer is used to protect pumps from large contaminants.
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

Size

Hole Size

Thickness

Material

25PS150A N/A 1.50 in38.10 mm N/A 1/4 in N/A 0.20 in N/A Aluminum
25PS200A N/A 2.00 in50.80 mm N/A 1/4 in N/A 0.20 in N/A Aluminum
25PS300A N/A 3.00 in76.20 mm N/A 1/4 in N/A 0.20 in N/A Aluminum
25PS400A N/A 4.00 in101.60 mm N/A 1/4 in N/A 0.20 in N/A Aluminum
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1